M42 bi-metal Lenox bandsaw blades

Products

M42 Bi-Metal - Bandsaw blades

HOW TO USE CHART
• Identify material on chart (solid, round, square, structural/tubing)
• Select tooth pitch from chart according to material size :
eg. 250mm solid round bar = 2/3 tooth – 1.4/2.0

TUBING AND STRUCTURALS
Multiply wall thickness by 3 times the wall thickness :
eg. 25mm x 3mm pipe : 9mm ie. 10/14 or 8/12 tooth

RUNNING-IN PROCEDURE
Feed rate should be reduced by 1/3 normal rate for first 450mm³

Please click on chart to enlarge.

Call any of our Blade Pit Crew on Speed Dial 08610 STEEL

M42 Bi-Metal -
Bandsaw blades - data sheet

PDF,

247 KB

Products

- Special Steels
- Hollow Bar
- Bi-metal bandsaw blades
- Flat Products Toll Processing

- Stainless Steel

Processing Capabilities
- Slitting Lines
- 3 Cut to Length/Blanking Lines
- Band Saws
- Band Saw Blade - Flash Butt-welder and Annealer

Trade Marks: The trade marks, devices, slogans and service marks (hereinafter referred to collectively as "trade marks") displayed on this website are registered and unregistered trade marks owned by the Sovereign Steel Group. Any unauthorized use of such trade marks and any other trade marks of the Sovereign Steel constitutes trademark infringement and/or passing off/and/or unlawful competition and is prohibited. Any trade mark/s appearing on this website do not grant a third party any license or right to use any such trademark/s unless prior written permission has been acquired from the Sovereign Steel Group.